Altering the colour of the mortar in your fire can provide the entire room a brand new really feel.
Mortar is the “grout” in your rock fire. The time period grout is extra generally used when referring to ceramic tile installations. Grout fills joints between tiles, and mortar joins stone collectively.
Along with offering a stable bond between the stone, it could additionally add to the design and curiosity of stone or brick.
In any case, you may change the colour of the mortar a few methods.
If the mortar is only a contact too darkish and also you wish to lighten it up a wee bit then begin with a 10-percent answer of muriatic acid. Apply the answer to the mortar joints solely utilizing a small bristle brush or related machine. Just a little of this gentle acid on the stone or brick will typically not damage as long as you don’t enable it to stay for very lengthy.
Permit the acid to stay on the mortar joints for a minimum of 5 minutes or till it has stopped fizzing. Rinse the world utterly and permit it to dry. You could want to attend a number of days till it has dried utterly to find out if the method labored. If the mortar has lightened however the desired consequence has not been achieved, give it one other acid therapy and permit it to dry to examine the outcomes.
Keep in mind, security first. Put on rubber gloves and eye safety. Be certain that there’s loads of air flow within the space when working with acid.
Apply a New Mortar Layer
One other approach to change the colour is to take away a few 1/4″ layer from the floor of the present mortar utilizing a hammer and chisel and apply a brand new layer as a replacement. Combine powdered pigment in with the brand new mortar to create a colour to fit your adorning wants.
First, make a number of take a look at samples on a board to just remember to have the specified colour. Remember to enable the pattern to utterly dry since mortar will usually lighten because it dries.